| |
 The WhisperTrax CV-Series is a single curving conveyor with minimum end lengths. Engineered to have the tightest turning radius in the industry, the CV-Series provides dependable, nearly maintenance-free operation. The conveyor comes with the bed section fully assembled, with legs separate for quick assembly.
Features & Benefits
- Multiple belt widths and curve angles available for a wide variety of applications
- Speed range of 5 to 75 fpm (1.5 to 22.9 mpm), with custom speed ranges available
- Increased load carrying capacity compared to belt conveyors
- Durable acetal chain provides long life, is completely self-tracking, is nearly silent running, and may be taken apart at any link
- Two-piece drive and idler sprockets for ease of replacement without shaft removal
- Non-corroding stainless steel drive shaft, idler shaft, and fasteners
- SpanLon wear strip and center support rail provide long-wearing, silent operation
- No “take ups” with WhisperTrax conveyors, as you have with belt conveyors; the overall length does not change
- Available in stainless steel or blue epoxy powder-coated steel for a long lasting finish
- Truly modular design and construction allow conveyor sections to be added, removed, or changed
- Minimum product size capability varies by conveyor model and chain type
Standard Chain Types
 |
PLN chain:
The WhisperTrax CV-PLN curving conveyor with plain chain is ideal for transporting items around curves. The chain can support objects down to 1 inch (25.4mm) in diameter if no transfer is used. The tight knit of the chain lattice provides a smooth base for small products. |
|
|
 |
MSG chain:
The WhisperTrax CV-MSG curving conveyor features 75mm left and right guides molded into the side links. These “Moving Side Guides” provide positive retention of products during transportation through the curve. This chain style is often indicated where the product to be moved might get tangled in conventional guide rails. |
|
|
 |
RAS chain:
The WhisperTrax CV-RAS curving conveyor with raised chain is typically used with finger transfers when consecutive conveyors are arranged end to end. Raised chain with a Finger Transfer can transfer products as small as 1.5 inches (38.1mm) in diameter. Raised top chain can also be used to reduce the area of contact between chain and product, increasing airflow. |
  |
|
|
