| |
 The WhisperTrax CU-Series is a double curving conveyor featuring two curves in the same direction. The CU-Series features variable straight lengths between the two curves, and between the curves and the ends of the conveyor.
Features & Benefits
- Multiple belt widths and curve angles available for a wide variety of applications
- Speed range of 5 to 75 fpm (1.5 to 22.9 mpm), with custom speed ranges available
- Increased load carrying capacity compared to belt conveyors
- Durable acetal chain provides long life, is completely self tracking, is nearly silent running, and may be taken apart at any link
- Two-piece drive and idler sprockets for ease of replacement without shaft removal
- Non-corroding stainless steel drive shaft, idler shaft, and fasteners
- SpanLon wear strip and center support rail provide long-wearing, silent operation
- No “take ups” with WhisperTrax conveyors, as you have with belt conveyors
- Available in stainless steel or blue epoxy powder-coated steel for a long lasting finish
- Truly modular design and construction allow conveyor sections to be added, removed, or changed
- Minimum product size capability varies by conveyor model and chain type
Standard Chain Types
 |
PLN chain:
The WhisperTrax CU-PLN double curving conveyor with plain chain is ideal for transporting packaged items through a double turn. The tight knit of the chain lattice provides a smooth base for large or small products, and offers the tightest turning radius in the industry. |
|
|
 |
MSG chain:
The WhisperTrax CU-MSG double curving conveyor features 75mm left and right guides molded into the side links. These “Moving Side Guides” provide positive retention of products during transportation. This chain style is often indicated where the product to be moved might get tangled in conventional guide rails. |
|
|
 |
RAS chain:
The WhisperTrax CU-RAS double curving conveyor with raised chain can transfer products as small as 1.5 inches (38.1mm) in diameter, when used with a finger transfer. Raised top chain can also be used to reduce the area of contact between chain and product, increasing airflow. |
  |
|
|
